Get rid of the old buildsystem

Bye, bye, old friend.

21 files changed, 0 insertions, 1383 deletions

diff --git a/buildlib/apti18n.h.in b/buildlib/apti18n.h.in
deleted file mode 100644
index 2202c5b19..000000000
--- a/buildlib/apti18n.h.in
+++ /dev/null
@@ -1,30 +0,0 @@
-// -*- mode: cpp; mode: fold -*-
-// $Id: apti18n.h.in,v 1.6 2003/01/11 07:18:18 jgg Exp $
-/* Internationalization macros for apt. This header should be included last
-   in each C file. */
-
-// Set by autoconf
-#undef USE_NLS
-
-#ifdef USE_NLS
-// apt will use the gettext implementation of the C library
-#include <libintl.h>
-#include <locale.h>
-# ifdef APT_DOMAIN
-#   define _(x) dgettext(APT_DOMAIN,x)
-#   define P_(msg,plural,n) dngettext(APT_DOMAIN,msg,plural,n)
-# else
-#   define _(x) gettext(x)
-#   define P_(msg,plural,n) ngettext(msg,plural,n)
-# endif
-# define N_(x) x
-#else
-// apt will not use any gettext
-# define setlocale(a, b)
-# define textdomain(a)
-# define bindtextdomain(a, b)
-# define _(x) x
-# define P_(msg,plural,n) (n == 1 ? msg : plural)
-# define N_(x) x
-# define dgettext(d, m) m
-#endif
diff --git a/buildlib/config.h.in b/buildlib/config.h.in
deleted file mode 100644
index 71c05c1cd..000000000
--- a/buildlib/config.h.in
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Define if your processor stores words with the most significant
-   byte first (like Motorola and SPARC, unlike Intel and VAX).  */
-#undef WORDS_BIGENDIAN
-
-/* Define if we have the timegm() function */
-#undef HAVE_TIMEGM
-
-/* Define if we have the zlib library for gzip */
-#undef HAVE_ZLIB
-
-/* Define if we have the bz2 library for bzip2 */
-#undef HAVE_BZ2
-
-/* Define if we have the lzma library for lzma/xz */
-#undef HAVE_LZMA
-
-/* Define if we have the lz4 library for lz4 */
-#undef HAVE_LZ4
-
-/* These two are used by the statvfs shim for glibc2.0 and bsd */
-/* Define if we have sys/vfs.h */
-#undef HAVE_VFS_H
-#undef HAVE_STRUCT_STATFS_F_TYPE
-
-/* Define if we have sys/mount.h */
-#undef HAVE_MOUNT_H
-
-/* Define if we have enabled pthread support */
-#undef HAVE_PTHREAD
-
-/* If there is no socklen_t, define this for the netdb shim */
-#undef NEED_SOCKLEN_T_DEFINE
-
-/* Check for getresuid() function and similar ones */
-#undef HAVE_GETRESUID
-#undef HAVE_GETRESGID
-#undef HAVE_SETRESUID
-#undef HAVE_SETRESGID
-
-/* Define to the size of the filesize containing structures */
-#undef _FILE_OFFSET_BITS
-
-/* Define the arch name string */
-#undef COMMON_ARCH
-
-/* The package name string */
-#undef PACKAGE
-
-/* The version number string */
-#undef PACKAGE_VERSION
-
-/* The mail address to reach upstream */
-#undef PACKAGE_MAIL
-
-#define APT_8_CLEANER_HEADERS
-#define APT_9_CLEANER_HEADERS
-#define APT_10_CLEANER_HEADERS
-
-/* unrolling is faster combined with an optimizing compiler */
-#define SHA2_UNROLL_TRANSFORM
diff --git a/buildlib/configure.mak b/buildlib/configure.mak
deleted file mode 100644
index e1a511544..000000000
--- a/buildlib/configure.mak
+++ /dev/null
@@ -1,62 +0,0 @@
-# -*- make -*-
-
-# This make fragment is included by the toplevel make to handle configure
-# and setup. It defines a target called startup that when run will init
-# the build directory, generate configure from configure.ac, create aclocal
-# and has rules to run config.status should one of the .in files change.
-
-# Input
-#  BUILDDIR - The build directory
-#  CONVERTED - List of files output by configure $(BUILD) is prepended
-#              The caller must provide depends for these files
-# It would be a fairly good idea to run this after a cvs checkout.
-BUILDDIR=build
-
-.PHONY: startup missing-config-files
-startup: $(BUILDDIR)/configure-stamp $(addprefix $(BUILDDIR)/,$(CONVERTED))
-
-# use the files provided from the system instead of carry around
-# and use (most of the time outdated) copycats
-ifeq (file-okay,$(shell test -r buildlib/config.sub && echo 'file-okay'))
-buildlib/config.sub:
-else
-   ifeq (file-okay,$(shell test -r /usr/share/misc/config.sub && echo 'file-okay'))
-buildlib/config.sub:
-	ln -sf /usr/share/misc/config.sub buildlib/config.sub
-   else
-buildlib/config.sub: missing-config-files
-   endif
-endif
-
-ifeq (file-okay,$(shell test -r buildlib/config.guess && echo 'file-okay'))
-buildlib/config.guess:
-else
-   ifeq (file-okay,$(shell test -r /usr/share/misc/config.guess && echo 'file-okay'))
-buildlib/config.guess:
-	ln -sf /usr/share/misc/config.guess buildlib/config.guess
-   else
-buildlib/config.guess: missing-config-files
-   endif
-endif
-
-missing-config-files:
-	@echo "APT needs 'config.guess' and 'config.sub' in buildlib/ for configuration."
-	@echo "On Debian systems these are available in the 'autotools-dev' package."
-	@echo
-	@echo "The latest versions can be acquired from the upstream git repository:"
-	@echo "http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD"
-	@echo "http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD"
-	exit 100
-
-configure: aclocal.m4 configure.ac
-	autoconf
-
-aclocal.m4: $(wildcard buildlib/*.m4)
-	aclocal -I buildlib
-
-$(BUILDDIR)/configure-stamp: configure buildlib/config.guess buildlib/config.sub
-	/usr/bin/test -e '$(BUILDDIR)' || mkdir '$(BUILDDIR)'
-	(HERE="`pwd`"; cd '$(BUILDDIR)' && "$$HERE/configure")
-	touch '$(BUILDDIR)/configure-stamp'
-
-$(addprefix $(BUILDDIR)/,$(CONVERTED)): $(BUILDDIR)/configure-stamp
diff --git a/buildlib/copy.mak b/buildlib/copy.mak
deleted file mode 100644
index 3ae11a7eb..000000000
--- a/buildlib/copy.mak
+++ /dev/null
@@ -1,31 +0,0 @@
-# -*- make -*-
-
-# This installs arbitrary files into a directory
-
-# Input
-# $(SOURCE) - The documents to use
-# $(TO)     - The directory to put them in
-# $(TARGET) - The global target to add the local target as a dependency
-#             to.
-# All output is writtin to files in the build/$(TO) directory
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := copy-$(firstword $(SOURCE))
-$(LOCAL)-LIST := $(addprefix $(TO)/,$(SOURCE))
-
-# Install generation hooks
-$(TARGET): $($(LOCAL)-LIST)
-veryclean: veryclean/$(LOCAL)
-
-MKDIRS += $(dir $($(LOCAL)-LIST))
-
-$($(LOCAL)-LIST) : $(TO)/% : %
-	echo Installing $< to $(@D)
-	cp $< $(@D)
-
-# Clean rule
-.PHONY: veryclean/$(LOCAL)
-veryclean/$(LOCAL):
-	-rm -rf $($(@F)-LIST)
diff --git a/buildlib/defaults.mak b/buildlib/defaults.mak
deleted file mode 100644
index 783cc11b0..000000000
--- a/buildlib/defaults.mak
+++ /dev/null
@@ -1,185 +0,0 @@
-# -*- make -*-
-
-# This file configures the default environment for the make system
-# The way it works is fairly simple, each module is defined in it's
-# own *.mak file. It expects a set of variables to be set to values
-# for it to operate as expected. When included the module generates
-# the requested rules based on the contents of its control variables.
-
-# This works out very well and allows a good degree of flexibility.
-# To accommodate some of the features we introduce the concept of 
-# local variables. To do this we use the 'Computed Names' feature of
-# gmake. Each module declares a LOCAL scope and access it with,
-#   $($(LOCAL)-VAR)
-# This works very well but it is important to remember that within
-# a rule the LOCAL var is unavailable, it will have to be constructed
-# from the information in the rule invocation. For stock rules like 
-# clean this is simple, we use a local clean rule called clean/$(LOCAL)
-# and then within the rule $(@F) gets back $(LOCAL)! Other rules will
-# have to use some other mechanism (filter perhaps?) The reason such
-# lengths are used is so that each directory can contain several 'instances'
-# of any given module. I notice that the very latest gmake has the concept
-# of local variables for rules. It is possible this feature in conjunction
-# with the generated names will provide a very powerful solution indeed!
-
-# A build directory is used by default, all generated items get put into
-# there. However unlike automake this is not done with a VPATH build
-# (vpath builds break the distinction between #include "" and #include <>)
-# but by explicitly setting the BUILD variable. Make is invoked from
-# within the source itself which is much more compatible with compilation
-# environments.
-ifndef NOISY
-.SILENT:
-endif
-
-# Search for the build directory
-ifdef BUILD
-BUILD_POSSIBLE := $(BUILD) $(BASE)/$(BUILD)
-else
-BUILD_POSSIBLE := $(BASE) $(BASE)/build-$(shell uname -m) $(BASE)/build
-endif
-
-BUILDX:= $(foreach i,$(BUILD_POSSIBLE),$(wildcard $(i)/environment.mak*))
-
-ifeq ($(words $(BUILDX)),0)
-
-# Check for a busted wildcard function. We use this function in several 
-# places, it must work.
-ifeq ($(words $(wildcard *)),0)
-error-all/environment.mak:
-	echo You have a broken version of GNU Make - upgrade.
-	error-out-and-die
-else
-error-all/environment.mak:
-	echo Can not find the build directory in $(BUILD_POSSIBLE) -- use BUILD=
-	error-out-and-die
-endif
-
-# Force include below to come to the error target
-BUILDX := error-all
-else
-BUILDX:= $(patsubst %/,%,$(firstword $(dir $(BUILDX))))
-endif
-
-override BUILD := $(BUILDX)
-
-# Base definitions
-INCLUDE := $(BUILD)/include
-BIN := $(BUILD)/bin
-LIB := $(BIN)
-OBJ := $(BUILD)/obj/$(SUBDIR)
-DEP := $(OBJ)
-DOC := $(BUILD)/docs
-PO := $(BUILD)/po
-LOCALE := $(BUILD)/locale
-PO_DOMAINS := $(BUILD)/po/domains
-
-# Module types
-LIBRARY_H = $(BASE)/buildlib/library.mak
-DOCBOOK_H = $(BASE)/buildlib/docbook.mak
-MANPAGE_H = $(BASE)/buildlib/manpage.mak
-PROGRAM_H = $(BASE)/buildlib/program.mak
-PYTHON_H = $(BASE)/buildlib/python.mak
-COPY_H = $(BASE)/buildlib/copy.mak
-PO4A_MANPAGE_H = $(BASE)/buildlib/po4a_manpage.mak
-FAIL_H = $(BASE)/buildlib/fail.mak
-PODOMAIN_H = $(BASE)/buildlib/podomain.mak
-
-include $(BUILD)/environment.mak
-
-ifdef STATICLIBS
-LIBRARY_H += $(BASE)/buildlib/staticlibrary.mak
-endif
-
-ifdef ONLYSTATICLIBS
-LIBRARY_H = $(BASE)/buildlib/staticlibrary.mak
-endif
-
-# Source location control
-# SUBDIRS specifies sub components of the module that
-# may be located in subdirectories of the source dir. 
-# This should be declared before including this file
-SUBDIRS+=
-
-# Header file control. 
-# TARGETDIRS indicates all of the locations that public headers 
-# will be published to.
-# This should be declared before including this file
-HEADER_TARGETDIRS+=
-
-# Options
-CPPFLAGS+= -I$(INCLUDE)
-LDFLAGS+= -L$(LIB)
-
-# Directors to create
-MKDIRS := $(BIN) 
-
-# Phony rules. Other things hook these by appending to the dependency
-# list
-.PHONY: headers library clean veryclean all binary program doc dirs
-.PHONY: maintainer-clean dist-clean distclean pristine sanity
-all: dirs binary doc
-binary: library program
-maintainer-clean dist-clean distclean pristine sanity: veryclean
-startup headers library clean veryclean program test update-po manpages docbook:
-
-veryclean:
-	echo Very Clean done for $(SUBDIR)
-clean:
-	echo Clean done for $(SUBDIR)
-dirs:
-	mkdir -p $(patsubst %/,%,$(sort $(MKDIRS)))
-
-# Header file control. We want all published interface headers to go
-# into the build directory from their source dirs. We setup some
-# search paths here
-vpath %.h $(SUBDIRS)
-$(INCLUDE)/%.h $(addprefix $(INCLUDE)/,$(addsuffix /%.h,$(HEADER_TARGETDIRS))) : %.h
-	cp $< $@
-
-# Dependency generation. We want to generate a .d file using gnu cpp.
-# For GNU systems the compiler can spit out a .d file while it is compiling,
-# this is specified with the INLINEDEPFLAG. Other systems might have a 
-# makedep program that can be called after compiling, that's illustrated
-# by the DEPFLAG case.
-# Compile rules are expected to call this macro after calling the compiler
-ifdef GCC3DEP
-DFILE = $(DEP)/$(basename $(@F)).d
-else
-DFILE = $(basename $(@F)).d
-endif
-ifdef INLINEDEPFLAG
- define DoDep
-	sed -e "1s/.*:/$(subst /,\\/,$@):/" $(DFILE) > $(DEP)/$(@F).d
-	#sed -e "1s/.*:/$(subst /,\\/,$@):/" $(DEP)/$(basename $(@F)).d > $(DEP)/$(@F).d
-	-rm -f $(basename $(@F)).d
- endef
-else
- ifdef DEPFLAG
-  define DoDep
-	$(CXX) $(DEPFLAG) $(CPPFLAGS) -o $@ $<
-	sed -e "1s/.*:/$(subst /,\\/,$@):/" $(basename $(@F)).d > $(DEP)/$(@F).d
-	-rm -f $(basename $(@F)).d
-  endef
- else
-  define DoDep
-  endef
- endif
-endif	
-
-# Automatic -j support
-ifeq ($(NUM_PROCS),1)
-  PARALLEL_RUN=no
-endif
-
-ifndef PARALLEL_RUN
- PARALLEL_RUN=yes
- export PARALLEL_RUN
- # handle recursion
- ifneq ($(NUM_PROCS),)
-  MAKEFLAGS += -j $(NUM_PROCS)
- endif
-endif
-
-# This makes sorting predictable
-export LC_COLLATE=C.UTF-8
diff --git a/buildlib/docbook.mak b/buildlib/docbook.mak
deleted file mode 100644
index 6aa3ca0d2..000000000
--- a/buildlib/docbook.mak
+++ /dev/null
@@ -1,75 +0,0 @@
-# -*- make -*-
-
-# This processes DocBook XML to produce html and plain text output
-
-# Input
-# $(SOURCE) - The documents to use
-
-# All output is written to files in the build doc directory
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := docbook-$(firstword $(SOURCE))
-$(LOCAL)-HTML := $(addsuffix .html,$(addprefix $(DOC)/,$(basename $(SOURCE))))
-$(LOCAL)-TEXT := $(addsuffix .text,$(addprefix $(DOC)/,$(basename $(SOURCE))))
-INCLUDES = apt.ent apt-verbatim.ent apt-vendor.ent
-
-docbook:
-
-
-#---------
-
-# Rules to build HTML documentations
-ifdef XSLTPROC
-
-DOCBOOK_HTML_STYLESHEET := docbook-html-style.xsl
-
-# Install generation hooks
-docbook: $($(LOCAL)-HTML)
-veryclean: veryclean/html/$(LOCAL)
-
-vpath %.dbk $(SUBDIRS)
-vpath $(DOCBOOK_HTML_STYLESHEET) $(SUBDIRS)
-$(DOC)/%.html: %.dbk $(DOCBOOK_HTML_STYLESHEET) $(INCLUDES)
-	echo Creating html for $< to $@
-	-rm -rf $@
-	mkdir -p $@
-	$(DOCBOOK) \
-		--stringparam base.dir $@/ \
-		--stringparam l10n.gentext.default.language $(LC) \
-		$(<D)/$(DOCBOOK_HTML_STYLESHEET) $< || exit 199
-
-# Clean rule
-.PHONY: veryclean/html/$(LOCAL)
-veryclean/html/$(LOCAL):
-	-rm -rf $($(@F)-HTML)
-
-endif
-
-#---------
-
-# Rules to build Text documentations
-ifdef XSLTPROC
-
-DOCBOOK_TEXT_STYLESHEET := docbook-text-style.xsl
-
-# Install generation hooks
-docbook: $($(LOCAL)-TEXT)
-veryclean: veryclean/text/$(LOCAL)
-
-vpath %.dbk $(SUBDIRS)
-vpath $(DOCBOOK_TEXT_STYLESHEET) $(SUBDIRS)
-$(DOC)/%.text: %.dbk $(DOCBOOK_TEXT_STYLESHEET) $(INCLUDES)
-	echo Creating text for $< to $@
-	$(DOCBOOK) \
-		--stringparam l10n.gentext.default.language $(LC) \
-		$(<D)/$(DOCBOOK_TEXT_STYLESHEET) $< | \
-		LC_ALL=C.UTF-8 $(DOCBOOK2TEXT) > $@ || exit 198
-
-# Clean rule
-.PHONY: veryclean/text/$(LOCAL)
-veryclean/text/$(LOCAL):
-	-rm -rf $($(@F)-TEXT)
-
-endif
diff --git a/buildlib/environment.mak.in b/buildlib/environment.mak.in
deleted file mode 100644
index 2ac3d6847..000000000
--- a/buildlib/environment.mak.in
+++ /dev/null
@@ -1,85 +0,0 @@
-# This file contains everything that autoconf guessed for your system.
-# if you want you can edit it, just don't re-run configure.
-
-PACKAGE = @PACKAGE@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PACKAGE_MAIL = @PACKAGE_MAIL@
-
-# C++ compiler options
-CC = @CC@
-CPPFLAGS+= @CPPFLAGS@ @DEFS@ -D_REENTRANT -D_FORTIFY_SOURCE=2
-CXX = @CXX@
-CXXSTD = -std=c++11
-CXXFLAGS+= @CXXFLAGS@ -Wall -Wextra
-CXXFLAGS+= -Wcast-align -Wlogical-op -Wredundant-decls -Wmissing-declarations -Wunsafe-loop-optimizations
-CXXFLAGS+= -Wctor-dtor-privacy -Wdisabled-optimization -Winit-self -Wmissing-include-dirs -Wnoexcept -Wsign-promo -Wundef
-# suggests methods which already have such an attribute
-#CXXFLAGS+= -Wsuggest-attribute=pure -Wsuggest-attribute=const -Wsuggest-attribute=noreturn
-# sanitize options to be enabled for testing
-#CXXFLAGS+= -fsanitize=address -fsanitize=undefined -fno-sanitize=vptr
-# a bit too pedantic to be run by default
-#CXXFLAGS+= -Wpedantic -Wno-long-long -Wno-vla -Wno-variadic-macros
-# hide inlines
-CXXFLAGS+= -fvisibility-inlines-hidden
-NUM_PROCS = @NUM_PROCS@
-
-# Linker stuff
-PICFLAGS+= -fPIC -DPIC
-LFLAGS+= @LDFLAGS@
-LEFLAGS+= 
-SOCKETLIBS:= @SOCKETLIBS@
-AR:=@AR@
-RANLIB:=@RANLIB@
-
-# Dep generation - this only works for gnu stuff
-GCC3DEP = @GCC3DEP@
-INLINEDEPFLAG = -MD
-
-DOXYGEN = @DOXYGEN@
-W3M = @W3M@
-
-# xsltproc for the man pages and documentation
-XSLTPROC := @XSLTPROC@
-
-# DocBook XML
-DOCBOOK = $(XSLTPROC) --nonet --novalid --xinclude
-DOCBOOK2TEXT = $(W3M) -o display_charset=UTF-8 -no-graph -T text/html \
-	-cols 78 -dump
-
-# po4a for the man pages
-PO4A := @PO4A@
-
-# Gettext settings
-GMSGFMT = @GMSGFMT@
-XGETTEXT = @XGETTEXT@
-MSGCOMM:=$(dir $(XGETTEXT))/msgcomm
-MSGMERGE:=$(dir $(XGETTEXT))/msgmerge
-BASH = @BASH@
-
-# Various library checks
-PTHREADLIB = @PTHREADLIB@
-PYTHONLIB = @PYTHONLIB@
-PYTHONVER = @PYTHONVER@
-PYTHONPREFIX = @PYTHONPREFIX@
-PYTHONEXECPREFIX = @PYTHONEXECPREFIX@
-PYTHONINCLUDE = @PYTHONINCLUDE@
-BDBLIB = @BDBLIB@
-INTLLIBS = @INTLLIBS@
-
-# Shim Headerfile control
-HAVE_STATVFS = @HAVE_STATVFS@
-HAVE_ZLIB = @HAVE_ZLIB@
-HAVE_BZ2 = @HAVE_BZ2@
-HAVE_LZMA = @HAVE_LZMA@
-HAVE_LZ4 = @HAVE_LZ4@
-NEED_SOCKLEN_T_DEFINE = @NEED_SOCKLEN_T_DEFINE@
-
-# Shared library things
-HOST_OS = @host_os@
-ifneq ($(words $(filter gnu% linux-gnu% kfreebsd-gnu% %-gnu,$(HOST_OS))),0)
-   SONAME_MAGIC=-Wl,-soname -Wl,
-   LFLAGS_SO=
-else
-   # Do not know how to create shared libraries here.
-   ONLYSTATICLIBS = yes
-endif
diff --git a/buildlib/fail.mak b/buildlib/fail.mak
deleted file mode 100644
index fc187766d..000000000
--- a/buildlib/fail.mak
+++ /dev/null
@@ -1,20 +0,0 @@
-# -*- make -*-
-
-# This prints a failure message but does not abort the make
-
-# Input
-# $(MESSAGE) - The message to show
-# $(PROGRAM) - The program/library/whatever.
-
-# See defaults.mak for information about LOCAL
-
-LOCAL := $(PROGRAM)
-$(LOCAL)-MSG := $(MESSAGE)
-
-# Install hooks
-program: $(PROGRAM)
-
-.PHONY: $(PROGRAM)
-$(PROGRAM) :
-	echo $($@-MSG)
-	
diff --git a/buildlib/install-sh b/buildlib/install-sh
deleted file mode 100644
index ebc66913e..000000000
--- a/buildlib/install-sh
+++ /dev/null
@@ -1,250 +0,0 @@
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/buildlib/library.mak b/buildlib/library.mak
deleted file mode 100644
index 7b12384c4..000000000
--- a/buildlib/library.mak
+++ /dev/null
@@ -1,77 +0,0 @@
-# -*- make -*-
-
-# This creates a shared library.
-
-# Input
-# $(SOURCE) - The source code to use
-# $(HEADERS) - Exported header files and private header files
-# $(LIBRARY) - The name of the library without lib or .so
-# $(MAJOR) - The major version number of this library
-# $(MINOR) - The minor version number of this library
-# $(APT_DOMAIN) - The text domain for this library
-
-# All output is writtin to .opic files in the build directory to
-# signify the PIC output.
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := lib$(LIBRARY).so.$(MAJOR).$(MINOR)
-$(LOCAL)-OBJS := $(addprefix $(OBJ)/,$(addsuffix .opic,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-DEP := $(addprefix $(DEP)/,$(addsuffix .opic.d,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-HEADERS := $(addprefix $(INCLUDE)/,$(HEADERS))
-$(LOCAL)-SONAME := lib$(LIBRARY).so.$(MAJOR)
-$(LOCAL)-VERSIONSCRIPT := $(LIB)/lib$(LIBRARY)-$(MAJOR)-$(MINOR).symver
-$(LOCAL)-SLIBS := $(SLIBS)
-$(LOCAL)-LIBRARY := $(LIBRARY)
-
-TYPE = src
-include $(PODOMAIN_H)
-
-# Install the command hooks
-headers: $($(LOCAL)-HEADERS)
-library: $(LIB)/lib$(LIBRARY).so $(LIB)/lib$(LIBRARY).so.$(MAJOR)
-clean: clean/$(LOCAL)
-veryclean: veryclean/$(LOCAL)
-
-# Make Directories
-MKDIRS += $(OBJ) $(DEP) $(LIB) $(dir $($(LOCAL)-HEADERS))
-
-# The clean rules
-.PHONY: clean/$(LOCAL) veryclean/$(LOCAL)
-clean/$(LOCAL):
-	-rm -f $($(@F)-OBJS) $($(@F)-DEP) $($(@F)-VERSIONSCRIPT)
-veryclean/$(LOCAL): clean/$(LOCAL)
-	-rm -f $($(@F)-HEADERS) $(LIB)/lib$($(@F)-LIBRARY)*.so*
-
-# Build rules for the two symlinks
-.PHONY: $(LIB)/lib$(LIBRARY).so.$(MAJOR) $(LIB)/lib$(LIBRARY).so
-$(LIB)/lib$(LIBRARY).so.$(MAJOR): $(LIB)/lib$(LIBRARY).so.$(MAJOR).$(MINOR)
-	ln -sf $(<F) $@
-$(LIB)/lib$(LIBRARY).so: $(LIB)/lib$(LIBRARY).so.$(MAJOR).$(MINOR)
-	ln -sf $(<F) $@
-
-$($(LOCAL)-VERSIONSCRIPT):
-	echo '$(shell echo '$(LIBRARY)' | tr -d '-' | tr 'a-z' 'A-Z')_$(MAJOR) { global: *; };' > $@
-
-# The binary build rule
-$(LIB)/lib$(LIBRARY).so.$(MAJOR).$(MINOR): $($(LOCAL)-HEADERS) $($(LOCAL)-OBJS) $(LIBRARYDEPENDS) $($(LOCAL)-VERSIONSCRIPT)
-	-rm -f $(LIB)/lib$($(@F)-LIBRARY)*.so* 2> /dev/null
-	echo Building shared library $@
-	$(CXX) $(CXXSTD) $(CXXFLAGS) $(LDFLAGS) -Wl,--version-script=$($(@F)-VERSIONSCRIPT) $(PICFLAGS) $(LFLAGS) $(LFLAGS_SO)\
-	   -o $@ $(SONAME_MAGIC)$($(@F)-SONAME) -shared \
-	   $(filter %.opic,$^) \
-	   $($(@F)-SLIBS) 
-
-# Compilation rules
-vpath %.cc $(SUBDIRS)
-$(OBJ)/%.opic: %.cc $(LIBRARYDEPENDS)
-	echo Compiling $< to $@
-	$(CXX) -c $(INLINEDEPFLAG) $(CPPFLAGS) $(CXXSTD) $(CXXFLAGS) $(PICFLAGS) -o $@ '$(abspath $<)'
-	$(DoDep)
-
-# Include the dependencies that are available
-The_DFiles = $(wildcard $($(LOCAL)-DEP))
-ifneq ($(words $(The_DFiles)),0)
-include $(The_DFiles)
-endif
diff --git a/buildlib/libversion.mak b/buildlib/libversion.mak
deleted file mode 100644
index 1b1855be3..000000000
--- a/buildlib/libversion.mak
+++ /dev/null
@@ -1,14 +0,0 @@
-# -*- make -*-
-# Version number of libapt-pkg.
-# Please increase MAJOR with each ABI break,
-# with each non-ABI break to the lib, please increase RELEASE.
-# The versionnumber is extracted from apt-pkg/macros.h - see also there.
-LIBAPTPKG_MAJOR=$(shell awk -v ORS='.' '/^\#define APT_PKG_M/ {print $$3}' $(BASE)/apt-pkg/contrib/macros.h | sed 's/\.$$//')
-LIBAPTPKG_RELEASE=$(shell grep '^\#define APT_PKG_RELEASE' $(BASE)/apt-pkg/contrib/macros.h | cut -d ' ' -f 3)
-
-# Version number of libapt-inst
-# Please increase MAJOR with each ABI break,
-# with each non-ABI break to the lib, please increase MINOR.
-# The versionnumber is extracted from apt-inst/makefile - see also there.
-LIBAPTINST_MAJOR=$(shell grep '^MAJOR=' $(BASE)/apt-inst/makefile |cut -d '=' -f 2)
-LIBAPTINST_MINOR=$(shell grep '^MINOR=' $(BASE)/apt-inst/makefile |cut -d '=' -f 2)
diff --git a/buildlib/makefile.in b/buildlib/makefile.in
deleted file mode 100644
index 66144cfc6..000000000
--- a/buildlib/makefile.in
+++ /dev/null
@@ -1,46 +0,0 @@
-# -*- make -*-
-
-# This is the build directory make file, it sets the build directory
-# and runs the src makefile.
-ifndef NOISY
-.SILENT:
-endif
-include environment.mak
-
-SRCDIR=@top_srcdir@
-BUILD:=$(shell pwd)
-export BUILD
-
-# Chain to the parent make to do the actual building
-.PHONY: headers library clean veryclean all binary program doc \
-        veryclean/local
-all headers library clean veryclean binary program doc:
-	$(MAKE) -C $(SRCDIR) -f Makefile $@
-
-# Purge everything.
-.PHONY: maintainer-clean dist-clean pristine sanity distclean
-maintainer-clean dist-clean pristine sanity distclean:
-	-rm -rf $(DIRS)
-	-rm -f config.cache config.log config.status environment.mak makefile
-	
-# Create the required directories and build the shims
-# The configure script fills in below, and then we do the right things..
-# This cannot go in the configure script since the directories have not yet
-# been created.. In any event I like the idea that you can change environment.mak
-# and run make dirs and have the shims updated.
-.PHONY: dirs
-dirs: 
-	$(MAKE) -C $(SRCDIR) -f Makefile $@
-ifeq ($(HAVE_STATVFS),yes)
-	@rm -f include/statvfs.h > /dev/null 2>&1
-else
-	@cp -p $(SRCDIR)/buildlib/statvfs.h.in include/statvfs.h
-	ln -sf . include/sys
-endif
-ifeq ($(NEED_SOCKLEN_T_DEFINE),yes)
-	@cp -p $(SRCDIR)/buildlib/netdb.h.in include/netdb.h
-else
-	@rm -f include/netdb.h > /dev/null 2>&1
-endif
-	rm -f include/python
-	ln -sf $(PYTHONINCLUDE) include/python
diff --git a/buildlib/manpage.mak b/buildlib/manpage.mak
deleted file mode 100644
index 063841d86..000000000
--- a/buildlib/manpage.mak
+++ /dev/null
@@ -1,30 +0,0 @@
-# -*- make -*-
-
-# This installs man pages into the doc directory
-
-# Input
-# $(SOURCE) - The documents to use
-
-# All output is written to files in the build doc directory
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := manpage-$(firstword $(SOURCE))
-$(LOCAL)-LIST := $(addprefix $(DOC)/,$(SOURCE))
-
-# Install generation hooks
-doc: manpages
-manpages: $($(LOCAL)-LIST)
-veryclean: veryclean/$(LOCAL)
-
-MKDIRS += $(DOC)
-
-$($(LOCAL)-LIST) : $(DOC)/% : %
-	echo Installing man page $< to $(@D)
-	cp $< $(@D)
-
-# Clean rule
-.PHONY: veryclean/$(LOCAL)
-veryclean/$(LOCAL):
-	-rm -rf $($(@F)-LIST)
diff --git a/buildlib/netdb.h.in b/buildlib/netdb.h.in
deleted file mode 100644
index 0fa60e157..000000000
--- a/buildlib/netdb.h.in
+++ /dev/null
@@ -1,6 +0,0 @@
-/* Fix broken unixen. */
-#include <config.h>
-#ifdef NEED_SOCKLEN_T_DEFINE
-        #define socklen_t size_t
-#endif
-#include_next <netdb.h>
diff --git a/buildlib/po4a_manpage.mak b/buildlib/po4a_manpage.mak
deleted file mode 100644
index df12e115c..000000000
--- a/buildlib/po4a_manpage.mak
+++ /dev/null
@@ -1,74 +0,0 @@
-# -*- make -*-
-
-# This handles man pages with po4a. We convert to the respective
-# output in the source directory then copy over to the final dest. This
-# means po4a is only needed if compiling from bzr
-
-# Input
-# $(LC)     - The language code of the translation
-
-# See defaults.mak for information about LOCAL
-
-# generate a list of accepted man page translations
-SOURCE = $(patsubst %.xml,%,$(wildcard *.$(LC).?.xml))
-INCLUDES = apt.ent apt-verbatim.ent apt-vendor.ent
-
-manpages:
-
-%.xsl: ../%.xsl
-	cp -a $< .
-
-# Do not use XMLTO, build the manpages directly with XSLTPROC
-ifdef XSLTPROC
-
-STYLESHEET=manpage-style.xsl
-
-LOCAL := po4a-manpage-$(firstword $(SOURCE))
-$(LOCAL)-LIST := $(SOURCE)
-
-# Install generation hooks
-manpages: $($(LOCAL)-LIST)
-clean: clean/$(LOCAL)
-veryclean: veryclean/$(LOCAL)
-
-apt-verbatim.ent: ../apt-verbatim.ent
-	cp -a ../apt-verbatim.ent .
-
-apt-vendor.ent: ../apt-vendor.ent
-	cp -a ../apt-vendor.ent .
-
-$($(LOCAL)-LIST) :: % : %.xml $(STYLESHEET) $(INCLUDES)
-	echo Creating man page $@
-	$(XSLTPROC) \
-		--stringparam l10n.gentext.default.language $(LC) \
-		-o $@ $(STYLESHEET) $< || exit 200 # why xsltproc doesn't respect the -o flag here???
-	test -f $(subst .$(LC),,$@) || echo 'FIXME: xsltproc respects the -o flag now, workaround can be removed'
-	mv -f $(subst .$(LC),,$@) $@
-
-# Clean rule
-.PHONY: clean/$(LOCAL) veryclean/$(LOCAL)
-clean/$(LOCAL):
-	rm -f $($(@F)-LIST) apt.ent apt-verbatim.ent
-veryclean/$(LOCAL):
-	# we are nuking the directory we are working in as it is auto-generated
-	rm -rf '$(abspath .)'
-
-HAVE_PO4A=yes
-endif
-
-# take care of the rest
-INCLUDES :=
-
-ifndef HAVE_PO4A
-# Strip from the source list any man pages we don't have compiled already
-SOURCE := $(wildcard $(SOURCE))
-endif
-
-# Chain to the manpage rule
-ifneq ($(words $(SOURCE)),0)
-include $(MANPAGE_H)
-endif
-
-# DocBook XML Documents
-SOURCE := $(wildcard *.$(LC).dbk)
-include $(DOCBOOK_H)
diff --git a/buildlib/podomain.mak b/buildlib/podomain.mak
deleted file mode 100644
index 265359abc..000000000
--- a/buildlib/podomain.mak
+++ /dev/null
@@ -1,27 +0,0 @@
-# -*- make -*-
-
-# This creates the file listing used by xgettext and friends based on the
-# declared domain of the make file. It also arranges to set the DOMAIN 
-# CPPFLAG for the compilation.
-
-ifneq ($(APT_DOMAIN),none)
-
-MY_DOMAIN := $(PACKAGE)
-ifdef APT_DOMAIN
-$($(LOCAL)-OBJS): CPPFLAGS := $(CPPFLAGS) -DAPT_DOMAIN='"$(APT_DOMAIN)"'
-MY_DOMAIN := $(APT_DOMAIN)
-endif
-
-MKDIRS += $(PO_DOMAINS)/$(MY_DOMAIN)
-$(PO_DOMAINS)/$(MY_DOMAIN)/$(LOCAL).$(TYPE)list: SRC := $(addprefix $(SUBDIR)/,$(SOURCE))
-$(PO_DOMAINS)/$(MY_DOMAIN)/$(LOCAL).$(TYPE)list: makefile dirs
-	(echo $(SRC) | xargs -n1 echo) > $@.tmp
-	cmp --silent $@.tmp $@ || mv $@.tmp $@
-startup binary program clean update-po: $(PO_DOMAINS)/$(MY_DOMAIN)/$(LOCAL).$(TYPE)list
-
-veryclean: veryclean/$(LOCAL)
-veryclean/po/$(LOCAL): LIST := $(PO_DOMAINS)/$(MY_DOMAIN)/$(LOCAL).$(TYPE)list
-veryclean/po/$(LOCAL):
-	rm -f $(LIST)
-
-endif
diff --git a/buildlib/program.mak b/buildlib/program.mak
deleted file mode 100644
index 1b4a5719a..000000000
--- a/buildlib/program.mak
+++ /dev/null
@@ -1,60 +0,0 @@
-# -*- make -*-
-
-# This creates a program
-
-# Input
-# $(SOURCE) - The source code to use
-# $(PROGRAM) - The name of the program
-# $(SLIBS) - Shared libs to link against
-# $(LIB_MAKES) - Shared library make files to depend on - to ensure we get
-# remade when the shared library version increases.
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := $(PROGRAM)
-$(LOCAL)-OBJS := $(addprefix $(OBJ)/,$(addsuffix .o,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-DEP := $(addprefix $(DEP)/,$(addsuffix .o.d,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-BIN := $(BIN)/$(PROGRAM)
-$(LOCAL)-SLIBS := $(SLIBS)
-$(LOCAL)-MKS := $(addprefix $(BASE)/,$(LIB_MAKES))
-
-# Install the command hooks
-program: $(BIN)/$(PROGRAM)
-clean: clean/$(LOCAL)
-veryclean: veryclean/$(LOCAL)
-
-TYPE = src
-include $(PODOMAIN_H)
-
-# Make Directories
-MKDIRS += $(OBJ) $(DEP) $(BIN)
-
-# The clean rules
-.PHONY: clean/$(LOCAL) veryclean/$(LOCAL) 
-clean/$(LOCAL):
-	-rm -f $($(@F)-OBJS) $($(@F)-DEP)
-veryclean/$(LOCAL): clean/$(LOCAL)
-	-rm -f $($(@F)-BIN)
-
-# The convience binary build rule
-.PHONY: $(PROGRAM)
-$(PROGRAM): $($(LOCAL)-BIN)
-
-# The binary build rule
-$($(LOCAL)-BIN): $($(LOCAL)-OBJS) $($(LOCAL)-MKS)
-	echo Building program $@
-	$(CXX) $(CXXSTD) $(CXXFLAGS) $(LDFLAGS) $(LFLAGS) -o $@ $(filter %.o,$^) $($(@F)-SLIBS) $(LEFLAGS)
-
-# Compilation rules
-vpath %.cc $(SUBDIRS)
-$(OBJ)/%.o: %.cc
-	echo Compiling $< to $@
-	$(CXX) -c $(INLINEDEPFLAG) $(CPPFLAGS) $(CXXSTD) $(CXXFLAGS) -o $@ '$(abspath $<)'
-	$(DoDep)
-
-# Include the dependencies that are available
-The_DFiles = $(wildcard $($(LOCAL)-DEP))
-ifneq ($(words $(The_DFiles)),0)
-include $(The_DFiles)
-endif 
diff --git a/buildlib/python.mak b/buildlib/python.mak
deleted file mode 100644
index 25349daa0..000000000
--- a/buildlib/python.mak
+++ /dev/null
@@ -1,68 +0,0 @@
-# -*- make -*-
-
-# This creates a python shared module.
-
-# Input
-# $(SOURCE) - The source code to use
-# $(MODULE) - The name of the module without module or .so 
-
-# All output is writtin to .opic files in the build directory to
-# signify the PIC output.
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := $(MODULE)module.so
-$(LOCAL)-OBJS := $(addprefix $(OBJ)/,$(addsuffix .opic,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-DEP := $(addprefix $(DEP)/,$(addsuffix .opic.d,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-SLIBS := $(SLIBS)
-$(LOCAL)-MODULE := $(MODULE)
-
-# Install the command hooks
-library: $(LIB)/$(MODULE)module.so
-clean: clean/$(LOCAL)
-veryclean: veryclean/$(LOCAL)
-
-# Make Directories
-MKDIRS += $(OBJ) $(DEP) $(LIB) 
-
-# The clean rules
-.PHONY: clean/$(LOCAL) veryclean/$(LOCAL)
-clean/$(LOCAL):
-	-rm -f $($(@F)-OBJS) $($(@F)-DEP)
-veryclean/$(LOCAL): clean/$(LOCAL)
-	-rm -f $($(@F)-HEADERS) $(LIB)/$($(@F)-MODULE)module.so*
-
-# The binary build rule.
-ifdef PYTHONLIB
-ifndef ONLYSTATICLIBS
-$(LIB)/$(MODULE)module.so: $($(LOCAL)-OBJS)
-	-rm -f $(LIB)/$($(@F)-MODULE)module.so* 2> /dev/null
-	echo Building shared Python module $@
-	$(CXX) $(CXXSTD) $(CXXFLAGS) $(LDFLAGS) $(PICFLAGS) $(LFLAGS) $(LFLAGS_SO)\
-	   -o $@ -shared \
-	   $(filter %.opic,$^) \
-	   $($(@F)-SLIBS) $(PYTHONLIB)
-else
-.PHONY: $(LIB)/$(MODULE)module.so
-$(LIB)/$(MODULE)module.so: 
-	echo Don't know how to make a python module here, not building $@
-endif # ifndef ONLYSTATICLIBS
-else
-.PHONY: $(LIB)/$(MODULE)module.so
-$(LIB)/$(MODULE)module.so: 
-	echo No python support, not building $@
-endif  # ifdef PYTHONLIB
-
-# Compilation rules
-vpath %.cc $(SUBDIRS)
-$(OBJ)/%.opic: %.cc
-	echo Compiling $< to $@
-	$(CXX) -c $(INLINEDEPFLAG) $(CPPFLAGS) $(CXXSTD) $(CXXFLAGS) $(PICFLAGS) -o $@ '$(abspath $<)'
-	$(DoDep)
-
-# Include the dependencies that are available
-The_DFiles = $(wildcard $($(LOCAL)-DEP))
-ifneq ($(words $(The_DFiles)),0)
-include $(The_DFiles)
-endif 
diff --git a/buildlib/staticlibrary.mak b/buildlib/staticlibrary.mak
deleted file mode 100644
index e81770e8a..000000000
--- a/buildlib/staticlibrary.mak
+++ /dev/null
@@ -1,60 +0,0 @@
-# -*- make -*-
-
-# This creates a static library.
-
-# Input
-# $(SOURCE) - The source code to use
-# $(HEADERS) - Exported header files and private header files
-# $(LIBRARY) - The name of the library without lib or .so 
-
-# All output is writtin to .o files in the build directory
-
-# See defaults.mak for information about LOCAL
-
-# Some local definitions
-LOCAL := lib$(LIBRARY).a
-$(LOCAL)-OBJS := $(addprefix $(OBJ)/,$(addsuffix .o,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-DEP := $(addprefix $(DEP)/,$(addsuffix .o.d,$(notdir $(basename $(SOURCE)))))
-$(LOCAL)-HEADERS := $(addprefix $(INCLUDE)/,$(HEADERS))
-$(LOCAL)-LIB := $(LIB)/lib$(LIBRARY).a
-
-# Install the command hooks
-headers: $($(LOCAL)-HEADERS)
-library: $($(LOCAL)-LIB)
-clean: clean/$(LOCAL)
-veryclean: veryclean/$(LOCAL)
-
-# Make Directories
-MKDIRS += $(OBJ) $(DEP) $(LIB) $(dir $($(LOCAL)-HEADERS))
-
-# The clean rules
-.PHONY: clean/$(LOCAL) veryclean/$(LOCAL)
-clean/$(LOCAL):
-	-rm -f $($(@F)-OBJS) $($(@F)-DEP)
-veryclean/$(LOCAL): clean/$(LOCAL)
-	-rm -f $($(@F)-HEADERS) $($(@F)-LIB)
-
-# Build rules for the two symlinks
-.PHONY: $($(LOCAL)-LIB)
-	
-# The binary build rule
-$($(LOCAL)-LIB): $($(LOCAL)-HEADERS) $($(LOCAL)-OBJS)
-	echo Building library $@
-	-rm $@ > /dev/null 2>&1
-	$(AR) cq $@ $(filter %.o,$^)
-ifneq ($(words $(RANLIB)),0)
-	$(RANLIB) $@
-endif
-
-# Compilation rules
-vpath %.cc $(SUBDIRS)
-$(OBJ)/%.o: %.cc
-	echo Compiling $< to $@
-	$(CXX) -c $(INLINEDEPFLAG) $(CPPFLAGS) $(CXXSTD) $(CXXFLAGS) -o $@ '$(abspath $<)'
-	$(DoDep)
-
-# Include the dependencies that are available
-The_DFiles = $(wildcard $($(LOCAL)-DEP))
-ifneq ($(words $(The_DFiles)),0)
-include $(The_DFiles)
-endif 
diff --git a/buildlib/statvfs.h.in b/buildlib/statvfs.h.in
deleted file mode 100644
index d0ec238ad..000000000
--- a/buildlib/statvfs.h.in
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Compatibility for systems with out Single Unix Spec statvfs */
-#include <config.h>
-
-#ifdef HAVE_VFS_H
-#include <sys/vfs.h>
-#endif
-
-#ifdef HAVE_MOUNT_H
-#include <sys/param.h>
-#include <sys/mount.h>
-#endif
-
-#define statvfs statfs
diff --git a/buildlib/tools.m4 b/buildlib/tools.m4
deleted file mode 100644
index 433d5ca32..000000000
--- a/buildlib/tools.m4
+++ /dev/null
@@ -1,110 +0,0 @@
-AC_DEFUN([ah_HAVE_GETCONF],
-	[AC_ARG_WITH(getconf,
-		[  --with-getconf          Enable automagical buildtime configuration],
-		[if test "$withval" = "yes"; then
-			AC_PATH_PROG(GETCONF, getconf)
-		elif test ! "$withval" = "no";then 
-			AC_MSG_CHECKING([getconf])
-			AC_MSG_RESULT([$withval])
-			GETCONF=$withval
-		fi],
-		[AC_PATH_PROG(GETCONF, getconf)]
-	)
-	AC_SUBST(GETCONF)
-])
-
-dnl ah_GET_CONF(variable, value ..., [default])
-AC_DEFUN([ah_GET_GETCONF],
-	[AC_REQUIRE([ah_HAVE_GETCONF])
-	if test ! -z "$GETCONF";then
-		old_args="[$]@"
-		set -- $2
-		while eval test -z \"\$$1\" -a ! -z \"[$]1\";do
-			eval $1=`$GETCONF "[$]1" 2>/dev/null`
-			shift
-		done
-	fi
-	if eval test -z \"\$$1\" -o \"\$$1\" = "-1";then
-		eval $1="$3"
-	fi
-])
-AC_DEFUN([ah_NUM_CPUS],
-	[AC_MSG_CHECKING([number of cpus])
-	AC_ARG_WITH(cpus,
-		[  --with-cpus             The number of cpus to be used for building(see --with-procs, default 1)],
-		[
-		if test "$withval" = "yes"; then
-			ah_GET_GETCONF(NUM_CPUS, SC_NPROCESSORS_ONLN _NPROCESSORS_ONLN, 1)
-		elif test ! "$withval" = "no";then
-			NUM_CPUS=$withval
-		elif test "$withval" = "no";then
-			NUM_CPUS=1
-		fi],
-		[ah_GET_GETCONF(NUM_CPUS, SC_NPROCESSORS_ONLN _NPROCESSORS_ONLN, 1)]
-	)
-	ah_NUM_CPUS_msg="$NUM_CPUS"
-	if test "$NUM_CPUS" = "0"; then
-		# broken getconf, time to bitch.
-		ah_NUM_CPUS_msg="found 0 cpus.  Has someone done a lobotomy?"
-		NUM_CPUS=1
-	fi
-	if test $NUM_CPUS = 1 ;then
-		default_PROC_MULTIPLY=1
-	else
-		default_PROC_MULTIPLY=2
-	fi
-	AC_MSG_RESULT([$ah_NUM_CPUS_msg])
-	AC_SUBST(NUM_CPUS)
-])
-AC_DEFUN([ah_PROC_MULTIPLY],
-	[AC_REQUIRE([ah_NUM_CPUS])
-	AC_MSG_CHECKING([processor multiplier])
-	AC_ARG_WITH(proc-multiply,
-		[  --with-proc-multiply    Multiply this * number of cpus for parallel making(default 2).],
-		[if test "$withval" = "yes"; then
-			PROC_MULTIPLY=$default_PROC_MULTIPLY
-		elif test ! "$withval" = "no";then
-			PROC_MULTIPLY=$withval
-		fi],
-		[PROC_MULTIPLY=$default_PROC_MULTIPLY]
-	)
-	AC_MSG_RESULT([$PROC_MULTIPLY])
-	AC_SUBST(PROC_MULTIPLY)
-])
-
-AC_DEFUN([ah_NUM_PROCS],
-	[AC_REQUIRE([ah_PROC_MULTIPLY])
-	AC_REQUIRE([ah_NUM_CPUS])
-	AC_MSG_CHECKING([number of processes to run during make])
-	AC_ARG_WITH(procs,
-		[  --with-procs            The number of processes to run in parallel during make(num_cpus * multiplier).],
-		[if test "$withval" = "yes"; then
-			NUM_PROCS=`expr $NUM_CPUS \* $PROC_MULTIPLY`
-		elif test ! "$withval" = "no";then
-			NUM_PROCS=$withval
-		fi],
-		[NUM_PROCS=`expr $NUM_CPUS \* $PROC_MULTIPLY`]
-	)
-	AC_MSG_RESULT([$NUM_PROCS])
-	AC_SUBST(NUM_PROCS)
-])
-
-AC_DEFUN([ah_GCC3DEP],[
-	AC_MSG_CHECKING(if $CXX -MD works)
-	touch gcc3dep.cc
-	${CXX-c++} -MD -o gcc3dep_test.o -c gcc3dep.cc
-	rm -f gcc3dep.cc gcc3dep_test.o
-	if test -e gcc3dep.d; then
-		rm -f gcc3dep.d
-		GCC_MD=input
-		GCC3DEP=
-	elif test -e gcc3dep_test.d; then
-		rm -f gcc3dep_test.d
-		GCC_MD=output
-		GCC3DEP=yes
-	else
-		AC_MSG_ERROR(no)
-	fi
-	AC_MSG_RESULT([yes, for $GCC_MD])
-	AC_SUBST(GCC3DEP)
-])