split up help messages for simpler reuse

That is one huge commit with busy work only: Help messages used to be
one big translateable string, which is a pain for translators and hard
to reuse for us. This change there 'explodes' this single string into
new string for each documented string trying hard to split up the
translated messages as well. This actually restores many translations as
previously adding a single command made all of the bug message fuzzy.
The splitup also highlighted that its easy to forget a line, duplicate
one and similar stuff.

Git-Dch: Ignore

1 files changed, 615 insertions, 218 deletions

diff --git a/doc/po/pt.po b/doc/po/pt.po
index 832d807fe..eae77d68d 100644
--- a/doc/po/pt.po
+++ b/doc/po/pt.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: apt-doc 1.0.7\n"
 "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2015-10-20 19:29+0200\n"
+"POT-Creation-Date: 2015-10-22 16:34+0200\n"
 "PO-Revision-Date: 2014-08-29 00:34+0100\n"
 "Last-Translator: Américo Monteiro <a_monteiro@gmx.com>\n"
 "Language-Team: Portuguese <traduz@debianpt.org>\n"
@@ -689,65 +689,106 @@ msgstr "Descrição"
 #. type: Content of: <refentry><refsect1><para>
 #: apt.8.xml
 msgid ""
-"<command>apt</command> (Advanced Package Tool) is the command-line tool for "
-"handling packages. It provides a commandline interface for the package "
-"management of the system.  See also &apt-get; and &apt-cache; for more low-"
-"level command options."
+"<command>apt</command> provides a high-level commandline interface for the "
+"package management system. It is intended as an end user interface and "
+"enables some options better suited for interactive usage by default compared "
+"to more specialized APT tools like &apt-get; and &apt-cache;."
 msgstr ""
-"<command>apt</command> (Advanced Package Tool) é uma ferramenta de linha de "
-"comandos para manuseamento de pacotes. Disponibiliza uma interface de linha "
-"de comandos para a gestão de pacotes do sistema. Veja também &apt-get; e "
-"&apt-cache; para mais opções de baixo nível dos comandos."
 
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para>
 #: apt.8.xml
 msgid ""
-"<literal>list</literal> is used to display a list of packages. It supports "
-"shell pattern for matching package names and the following options: "
-"<option>--installed</option>, <option>--upgradable</option>, <option>--"
-"upgradeable</option>, <option>--all-versions</option> are supported."
+"Much like <command>apt</command> itself, its manpage is intended as an end "
+"user interface and as such only mentions the most used commands and options "
+"partly to not duplicate information in multiple places and partly to avoid "
+"overwelming readers with a cornucopia of options and details."
 msgstr ""
-"<literal>list</literal> é usado para mostrar uma lista de pacotes. Suporta "
-"padrões da shell para corresponder aos nomes de pacotes e são suportadas as "
-"seguintes opções <option>--installed</option>, <option>--upgradable</"
-"option>, <option>--all-versions</option>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+#, fuzzy
+#| msgid "apt-get"
+msgid "(&apt-get;)"
+msgstr "apt-get"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""
-"<literal>search</literal> searches for the given term(s) and display "
-"matching packages."
+"<option>update</option> is used to download package information from all "
+"configured sources. Other commands operate on this data to e.g. perform "
+"package upgrades or search in and display details about all packages "
+"available for installation."
 msgstr ""
-"<literal>search</literal> procura por termo(s) determinado(s) e mostra os "
-"pacotes correspondentes."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>upgrade</literal> is used to install the newest versions of all "
+#| "packages currently installed on the system from the sources enumerated in "
+#| "<filename>/etc/apt/sources.list</filename>. New packages will be "
+#| "installed, but existing packages will never be removed."
+msgid ""
+"<option>upgrade</option> is used to install available upgrades of all "
+"packages currently installed on the system from the sources configured via "
+"&sources-list;. New packages will be installed if required to statisfy "
+"dependencies, but existing packages will never be removed. If an upgrade for "
+"a package requires the remove of an installed package the upgrade for this "
+"package isn't performed."
+msgstr ""
+"<literal>upgrade</literal> é usado para instalar as versões mais recentes de "
+"todos os pacotes actualmente instalados no sistema a partir das fontes "
+"enumeradas em <filename>/etc/apt/sources.list</filename>. Serão instalados "
+"novos pacotes, mas pacotes existentes nunca serão removidos."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>full-upgrade</literal> performs the function of upgrade but may "
+#| "also remove installed packages if that is required in order to resolve a "
+#| "package conflict."
 msgid ""
-"<literal>show</literal> shows the package information for the given "
-"package(s)."
+"<literal>full-upgrade</literal> performs the function of upgrade but will "
+"remove currently installed packages if this is needed to upgrade the system "
+"as a whole."
+msgstr ""
+"<literal>full-upgrade</literal> executa a função de upgrade mas pode também "
+"remover pacotes instalados se tal for necessário de modo a resolver um "
+"conflito de pacotes."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid ","
 msgstr ""
-"<literal>show</literal> mostra a informação do pacote para o(s) pacote(s) "
-"determinado(s)."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""
-"<literal>install</literal> is followed by one or more package names desired "
-"for installation or upgrading."
+"Performs the requested action on one or more packages specified via &regex;, "
+"&glob; or exact match. The requested action can be overidden for specific "
+"packages by append a plus (+) to the package name to install this package or "
+"a minus (-) to remove it."
 msgstr ""
-"<literal>install</literal> é seguido por um ou mais nomes de pacotes que se "
-"deseja instalar ou actualizar."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "A specific version of a package can be selected for installation by "
+#| "following the package name with an equals and the version of the package "
+#| "to select. This will cause that version to be located and selected for "
+#| "install. Alternatively a specific distribution can be selected by "
+#| "following the package name with a slash and the version of the "
+#| "distribution or the Archive name (stable, testing, unstable)."
 msgid ""
 "A specific version of a package can be selected for installation by "
-"following the package name with an equals and the version of the package to "
-"select. This will cause that version to be located and selected for install. "
-"Alternatively a specific distribution can be selected by following the "
-"package name with a slash and the version of the distribution or the Archive "
-"name (stable, testing, unstable)."
+"following the package name with an equals (=) and the version of the package "
+"to select. Alternatively the version from a specific release can be selected "
+"by following the package name with a forward slash (/) and codename (&stable-"
+"codename;, &testing-codename;, sid …) or suite name (stable, testing, "
+"unstable). This will also select versions from this release for dependencies "
+"of this package if needed to satisfy the request."
 msgstr ""
 "Pode ser seleccionada para instalação uma versão específica de um pacote ao "
 "continuar o nome do pacote com um igual (=) e a versão do pacote a "
@@ -757,36 +798,29 @@ msgstr ""
 "versão da distribuição ou o nome de Arquivo (stable, testing, unstable)."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
 msgid ""
-"<literal>remove</literal> is identical to <literal>install</literal> except "
-"that packages are removed instead of installed. Note that removing a package "
-"leaves its configuration files on the system. If a plus sign is appended to "
-"the package name (with no intervening space), the identified package will be "
-"installed instead of removed."
-msgstr ""
-"<literal>remove</literal> é idêntico a <literal>install</literal>  à "
-"excepção que os pacotes são removidos em vez de instalados. Note que remover "
-"um pacote deixa os seus ficheiros de configuração no sistema. Se um sinal "
-"mais (+) for acrescentado ao nome do pacote (sem nenhum espaço a separar), o "
-"pacote identificado será instalado em vez de removido."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml apt-get.8.xml
-msgid "(and the"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml apt-get.8.xml
-msgid "alias since 1.1)"
+"Removing a package removes all packaged data, but leaves usually small "
+"(modified) user configuration files behind, in case the remove was an "
+"accident. Just issuing an installtion request for the accidently removed "
+"package will restore it funcation as before in that case. On the other hand "
+"you can get right of these leftovers via calling <command>purge</command> "
+"even on already removed packages.  Note that this does not effect any data "
+"or configuration stored in your home directory."
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>autoremove</literal> is used to remove packages that were "
+#| "automatically installed to satisfy dependencies for other packages and "
+#| "are now no longer needed."
 msgid ""
 "<literal>autoremove</literal> is used to remove packages that were "
 "automatically installed to satisfy dependencies for other packages and are "
-"now no longer needed."
+"now no longer needed as dependencies changed or the package(s)  needing them "
+"were removed in the meantime."
 msgstr ""
 "<literal>autoremove</literal> é usado para remover pacotes que foram "
 "instalados automaticamente para satisfazer dependências de outros pacotes e "
@@ -795,64 +829,98 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""
-"<literal>edit-sources</literal> lets you edit your sources.list file and "
-"provides basic sanity checks."
+"Try to ensure that the list does not include applications you have grown to "
+"like even through they there once installed just as a dependency of another "
+"package. You can mark such a package as manually installed by using &apt-"
+"mark;. Packages which you have installed explicitly via <command>install</"
+"command> are never proposed for automatic removal as well."
 msgstr ""
-"<literal>edit-sources</literal> permite-lhe editar o seu ficheiro sources."
-"list e disponibiliza verificações de sanidade básicas."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+#, fuzzy
+#| msgid "&apt-conf;"
+msgid "(&apt-cache;)"
+msgstr "&apt-conf;"
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""
-"<literal>update</literal> is used to resynchronize the package index files "
-"from their sources."
+"<option>search</option> can be used to search for the given &regex; term(s) "
+"in the list of the available packages and display matches.  This can e.g. be "
+"useful if you are looking for packages having a specific feature.  If you "
+"are looking for a package including a specific file try &apt-file;."
 msgstr ""
-"<literal>update</literal> é usado para re-sincronizar o índice dos pacotes a "
-"partir das suas fontes."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""
-"<literal>upgrade</literal> is used to install the newest versions of all "
-"packages currently installed on the system from the sources enumerated in "
-"<filename>/etc/apt/sources.list</filename>. New packages will be installed, "
-"but existing packages will never be removed."
+"Show information about the given package(s) including its dependencies, "
+"installation and download size, sources the package is available from, the "
+"description of the packages content and many more. It can e.g. be helpful to "
+"look at this information before allowing &apt; to remove a package or while "
+"searching for new packages to install."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid "(work-in-progress)"
 msgstr ""
-"<literal>upgrade</literal> é usado para instalar as versões mais recentes de "
-"todos os pacotes actualmente instalados no sistema a partir das fontes "
-"enumeradas em <filename>/etc/apt/sources.list</filename>. Serão instalados "
-"novos pacotes, mas pacotes existentes nunca serão removidos."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
-msgid ""
-"<literal>full-upgrade</literal> performs the function of upgrade but may "
-"also remove installed packages if that is required in order to resolve a "
-"package conflict."
+#, fuzzy
+#| msgid ""
+#| "<literal>list</literal> is used to display a list of packages. It "
+#| "supports shell pattern for matching package names and the following "
+#| "options: <option>--installed</option>, <option>--upgradable</option>, "
+#| "<option>--upgradeable</option>, <option>--all-versions</option> are "
+#| "supported."
+msgid ""
+"<option>list</option> is somewhat similar to <command>dpkg-query --list</"
+"command> in that it can display a list of packages satisfying certain "
+"criteria.  It supports &glob; patterns for matching package names as well as "
+"options to list installed (<option>--installed</option>), upgradeable "
+"(<option>--upgradeable</option>) or all available (<option>--all-versions</"
+"option>) versions."
 msgstr ""
-"<literal>full-upgrade</literal> executa a função de upgrade mas pode também "
-"remover pacotes instalados se tal for necessário de modo a resolver um "
-"conflito de pacotes."
+"<literal>list</literal> é usado para mostrar uma lista de pacotes. Suporta "
+"padrões da shell para corresponder aos nomes de pacotes e são suportadas as "
+"seguintes opções <option>--installed</option>, <option>--upgradable</"
+"option>, <option>--all-versions</option>."
 
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-mark.8.xml apt-config.8.xml
-#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
-msgid "options"
-msgstr "opções"
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>edit-sources</literal> lets you edit your sources.list file and "
+#| "provides basic sanity checks."
+msgid ""
+"<literal>edit-sources</literal> lets you edit your &sources-list; files in "
+"your preferred texteditor while also providing basic sanity checks."
+msgstr ""
+"<literal>edit-sources</literal> permite-lhe editar o seu ficheiro sources."
+"list e disponibiliza verificações de sanidade básicas."
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt.8.xml
-msgid "Script usage"
-msgstr "Utilização de script"
+msgid "Script usage and Differences to other APT tools"
+msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "The &apt; commandline is designed as a end-user tool and it may change "
+#| "the output between versions. While it tries to not break backward "
+#| "compatibility there is no guarantee for it either.  All features of &apt; "
+#| "are available in &apt-cache; and &apt-get; via APT options. Please prefer "
+#| "using these commands in your scripts."
 msgid ""
-"The &apt; commandline is designed as a end-user tool and it may change the "
-"output between versions. While it tries to not break backward compatibility "
-"there is no guarantee for it either.  All features of &apt; are available in "
-"&apt-cache; and &apt-get; via APT options. Please prefer using these "
-"commands in your scripts."
+"The &apt; commandline is designed as a end-user tool and it may change "
+"behaviour between versions. While it tries to not break backward "
+"compatibility there is no guarantee for it either if it seems benefitial for "
+"interactive use."
 msgstr ""
 "A linha de comandos do &apt; foi desenhada como ferramenta de utilizador "
 "final e pode variar os textos mostrados entre versões. Apesar de tentar não "
@@ -861,49 +929,15 @@ msgstr ""
 "get; via opções do APT. Por favor dê preferência a usar estes comandos nos "
 "seus scripts."
 
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml
-msgid "Differences to &apt-get;"
-msgstr "Diferenças para o &apt-get;"
-
 #. type: Content of: <refentry><refsect1><para>
 #: apt.8.xml
 msgid ""
-"The <command>apt</command> command is meant to be pleasant for end users and "
-"does not need to be backward compatible like &apt-get;. Therefore some "
-"options are different:"
-msgstr ""
-"O comando  <command>apt</command> destina-se a ser agradável para os "
-"utilizadores finais e não precisa de ser compatível com as versões "
-"anteriores como o &apt-get;. Por isso algumas opções são diferentes."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
-msgstr "A opção <literal>DPkg::Progress-Fancy</literal> está activada."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid "The option <literal>APT::Color</literal> is enabled."
-msgstr "A opção <literal>APT::Color</literal> está activada."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid ""
-"A new <literal>list</literal> command is available similar to <literal>dpkg "
-"--list</literal>."
-msgstr ""
-"Está disponível um novo comando <literal>list</literal> de modo semelhante a "
-"<literal>dpkg --list</literal>."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid ""
-"The option <literal>upgrade</literal> has <literal>--with-new-pkgs</literal> "
-"enabled by default."
+"All features of &apt; are available in dedicated APT tools like &apt-get; "
+"and &apt-cache; as well.  &apt; just changes the default value of some "
+"options (see &apt-conf; and specifically the Binary scope). So prefer using "
+"these commands (potentially with some additional options enabled) in your "
+"scripts as they keep backward compatibility as much as possible."
 msgstr ""
-"A opção <literal>upgrade</literal> tem <literal>--with-new-pkgs</literal> "
-"activado por predefinição."
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
@@ -1091,6 +1125,23 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml
 msgid ""
+"A specific version of a package can be selected for installation by "
+"following the package name with an equals and the version of the package to "
+"select. This will cause that version to be located and selected for install. "
+"Alternatively a specific distribution can be selected by following the "
+"package name with a slash and the version of the distribution or the Archive "
+"name (stable, testing, unstable)."
+msgstr ""
+"Pode ser seleccionada para instalação uma versão específica de um pacote ao "
+"continuar o nome do pacote com um igual (=) e a versão do pacote a "
+"seleccionar. Isto irá fazer com que essa versão seja localizada e "
+"seleccionada para instalação. Alternativamente pode ser seleccionada uma "
+"distribuição específica ao continuar o nome do pacote com uma slash (/) e a "
+"versão da distribuição ou o nome de Arquivo (stable, testing, unstable)."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
 "Both of the version selection mechanisms can downgrade packages and must be "
 "used with care."
 msgstr ""
@@ -1148,6 +1199,21 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml
 msgid ""
+"<literal>remove</literal> is identical to <literal>install</literal> except "
+"that packages are removed instead of installed. Note that removing a package "
+"leaves its configuration files on the system. If a plus sign is appended to "
+"the package name (with no intervening space), the identified package will be "
+"installed instead of removed."
+msgstr ""
+"<literal>remove</literal> é idêntico a <literal>install</literal>  à "
+"excepção que os pacotes são removidos em vez de instalados. Note que remover "
+"um pacote deixa os seus ficheiros de configuração no sistema. Se um sinal "
+"mais (+) for acrescentado ao nome do pacote (sem nenhum espaço a separar), o "
+"pacote identificado será instalado em vez de removido."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
 "<literal>purge</literal> is identical to <literal>remove</literal> except "
 "that packages are removed and purged (any configuration files are deleted "
 "too)."
@@ -1276,6 +1342,16 @@ msgstr ""
 "obtidos. Remove tudo excepto o ficheiro lock de <filename>&cachedir;/"
 "archives/</filename> e <filename>&cachedir;/archives/partial/</filename>."
 
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "(and the"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "alias since 1.1)"
+msgstr ""
+
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml
 msgid ""
@@ -1297,6 +1373,17 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml
+msgid ""
+"<literal>autoremove</literal> is used to remove packages that were "
+"automatically installed to satisfy dependencies for other packages and are "
+"now no longer needed."
+msgstr ""
+"<literal>autoremove</literal> é usado para remover pacotes que foram "
+"instalados automaticamente para satisfazer dependências de outros pacotes e "
+"que já não são necessários."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
 #, fuzzy
 #| msgid ""
 #| "<literal>changelog</literal> downloads a package changelog and displays "
@@ -1338,6 +1425,12 @@ msgid ""
 "<literal><filename>doc/acquire-additional-files.txt</filename></literal>."
 msgstr ""
 
+#. type: Content of: <refentry><refsect1><title>
+#: apt-get.8.xml apt-cache.8.xml apt-config.8.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "options"
+msgstr "opções"
+
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-get.8.xml
 msgid ""
@@ -2605,6 +2698,14 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml
+msgid ""
+"It is critical that keys added manually via <command>apt-key</command> are "
+"verified to belong to the owner of the repositories they claim to be for "
+"otherwise the &apt-secure; infrastructure is completely undermined."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
 msgid "Remove a key from the list of trusted keys."
 msgstr "Remove uma chave da lista de chaves de confiança."
 
@@ -2631,11 +2732,11 @@ msgstr "Lista as fingerprints das chaves de confiança."
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml
 msgid ""
-"Pass advanced options to gpg. With adv --recv-key you can download the "
-"public key."
+"Pass advanced options to gpg. With <command>adv --recv-key</command> you can "
+"e.g. download key from keyservers directly into the the trusted set of keys. "
+"Note that there are <emphasis>no</emphasis> checks performed, so it is easy "
+"to completely undermine the &apt-secure; infrastructure if used without care."
 msgstr ""
-"Passa opções avançadas ao gpg. Com adv --recv-key você pode descarregar a "
-"chave pública."
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-key.8.xml
@@ -2669,7 +2770,7 @@ msgstr ""
 "lo."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml apt-cdrom.8.xml
+#: apt-key.8.xml apt-mark.8.xml apt-cdrom.8.xml
 msgid "Options"
 msgstr "Opções"
 
@@ -2737,26 +2838,42 @@ msgstr "&apt-get;, &apt-secure;"
 
 #. type: Content of: <refentry><refnamediv><refpurpose>
 #: apt-mark.8.xml
-msgid "mark/unmark a package as being automatically-installed"
-msgstr "marca/desmarca um pacote como sendo instalado automaticamente"
+msgid "show, set and unset various settings for a package"
+msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
 msgid ""
-"<command>apt-mark</command> will change whether a package has been marked as "
-"being automatically installed."
+"<command>apt-mark</command> can be used as a unified frontend to set various "
+"settings for a package like marking a package as being automatically/"
+"manually installed or changing <command>dpkg</command> selections such as "
+"hold, install, deinstall and purge which are respected e.g. by <command>apt-"
+"get dselect-upgrade</command> or <command>aptitude</command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Automatically and manually installed packages"
 msgstr ""
-"<command>apt-mark</command> irá modificar se um pacote foi marcado como "
-"sendo instalado automaticamente."
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
+#, fuzzy
+#| msgid ""
+#| "When you request that a package is installed, and as a result other "
+#| "packages are installed to satisfy its dependencies, the dependencies are "
+#| "marked as being automatically installed.  Once these automatically "
+#| "installed packages are no longer depended on by any manually installed "
+#| "packages, they will be removed by e.g.  <command>apt-get</command> or "
+#| "<command>aptitude</command>."
 msgid ""
 "When you request that a package is installed, and as a result other packages "
 "are installed to satisfy its dependencies, the dependencies are marked as "
-"being automatically installed.  Once these automatically installed packages "
-"are no longer depended on by any manually installed packages, they will be "
-"removed by e.g.  <command>apt-get</command> or <command>aptitude</command>."
+"being automatically installed, while package you installed explicitely is "
+"marked as manually installed.  Once a automatically installed package is no "
+"longer depended on by any manually installed package it is considered no "
+"longer needed and e.g. <command>apt-get</command> or <command>aptitude</"
+"command> will at least suggest removing them."
 msgstr ""
 "Quando você pede que um pacote seja instalado, e como resultado outros "
 "pacotes são instalados para satisfazer as suas dependências, as dependências "
@@ -2790,30 +2907,6 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-mark.8.xml
 msgid ""
-"<literal>hold</literal> is used to mark a package as held back, which will "
-"prevent the package from being automatically installed, upgraded or "
-"removed.  The command is only a wrapper around <command>dpkg --set-"
-"selections</command> and the state is therefore maintained by &dpkg; and not "
-"affected by the <option>--file</option> option."
-msgstr ""
-"<literal>hold</literal> é usado para marcar um pacote como retido, o que vai "
-"prevenir que o pacote seja automaticamente instalado, actualizado ou "
-"removido. O comando é apenas um invólucro em redor de <command>dpkg --set-"
-"selections</command> e o estado é assim mantido pelo &dpkg; e não é afectado "
-"pela opção <option>--file</option>."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml
-msgid ""
-"<literal>unhold</literal> is used to cancel a previously set hold on a "
-"package to allow all actions again."
-msgstr ""
-"<literal>unhold</literal> é usado para cancelar um \"hold\" previamente "
-"definido num pacote para permitir de novo todas as acções."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml
-msgid ""
 "<literal>showauto</literal> is used to print a list of automatically "
 "installed packages with each package on a new line.  All automatically "
 "installed packages will be listed if no package is given.  If packages are "
@@ -2836,6 +2929,48 @@ msgstr ""
 "<literal>showauto</literal>, excepto que irá escrever uma lista dos pacotes "
 "instalados manualmente."
 
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"Read/Write package stats from the filename given with the parameter "
+"&synopsis-param-filename; instead of from the default location, which is "
+"<filename>extended_status</filename> in the directory defined by the "
+"Configuration Item: <literal>Dir::State</literal>."
+msgstr ""
+"Lê/Escreve o estado de pacote a partir do nome de ficheiro dado com o "
+"parâmetro &synopsis-param-filename; em vez de o fazer a partir da "
+"localização predefinida, a qual é <filename>extended_status</filename> no "
+"directório definido pelo Item de Configuração: <literal>Dir::State</literal>."
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Prevent changes for a package"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>manual</literal> is used to mark a package as being manually "
+#| "installed, which will prevent the package from being automatically "
+#| "removed if no other packages depend on it."
+msgid ""
+"<literal>hold</literal> is used to mark a package as held back, which will "
+"prevent the package from being automatically installed, upgraded or removed."
+msgstr ""
+"<literal>manual</literal> é usado para marcar um pacote como sendo instalado "
+"manualmente, o que irá prevenir que o pacote seja removido automaticamente "
+"se nenhum outro pacote depender dele."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"<literal>unhold</literal> is used to cancel a previously set hold on a "
+"package to allow all actions again."
+msgstr ""
+"<literal>unhold</literal> é usado para cancelar um \"hold\" previamente "
+"definido num pacote para permitir de novo todas as acções."
+
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt-mark.8.xml
 msgid ""
@@ -2845,18 +2980,23 @@ msgstr ""
 "<literal>showhold</literal> é usado para escrever uma lista dos pacotes em "
 "retenção do mesmo modo que os outros comandos show."
 
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Shedule packages for install, remove and purge"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
 msgid ""
-"Read/Write package stats from the filename given with the parameter "
-"&synopsis-param-filename; instead of from the default location, which is "
-"<filename>extended_status</filename> in the directory defined by the "
-"Configuration Item: <literal>Dir::State</literal>."
+"Some frontends like <command>apt-get dselect-upgrade</command> can be used "
+"to apply previously sheduled changes to the install state of packages. Such "
+"changes can be sheduled with the <option>install</option>, <option>remove</"
+"option> (also known as <option>deinstall</option>) and <option>purge</"
+"option> commands.  Packages with a specific selection can be displayed with "
+"<option>showinstall</option>, <option>showremove</option> and "
+"<option>showpurge</option> respectively.  More information about these so "
+"called dpkg selections can be found in &dpkg;."
 msgstr ""
-"Lê/Escreve o estado de pacote a partir do nome de ficheiro dado com o "
-"parâmetro &synopsis-param-filename; em vez de o fazer a partir da "
-"localização predefinida, a qual é <filename>extended_status</filename> no "
-"directório definido pelo Item de Configuração: <literal>Dir::State</literal>."
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
@@ -2874,11 +3014,17 @@ msgstr "Suporte de autenticação de arquivos para o APT"
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "Starting with version 0.6, <command>apt</command> contains code that does "
+#| "signature checking of the Release file for all archives. This ensures "
+#| "that packages in the archive can't be modified by people who have no "
+#| "access to the Release file signing key."
 msgid ""
-"Starting with version 0.6, <command>apt</command> contains code that does "
-"signature checking of the Release file for all archives. This ensures that "
-"packages in the archive can't be modified by people who have no access to "
-"the Release file signing key."
+"Starting with version 0.6, <command>APT</command> contains code that does "
+"signature checking of the Release file for all repositories. This ensures "
+"that data like packages in the archive can't be modified by people who have "
+"no access to the Release file signing key."
 msgstr ""
 "A partir da versão 0.6, o <command>apt</command> contém código que faz "
 "verificação de assinaturas do ficheiro Release para todos os arquivos. Isto "
@@ -2888,37 +3034,56 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
 msgid ""
-"If a package comes from a archive without a signature, or with a signature "
-"that apt does not have a key for, that package is considered untrusted, and "
-"installing it will result in a big warning. <command>apt-get</command> will "
-"currently only warn for unsigned archives; future releases might force all "
-"sources to be verified before downloading packages from them."
+"If an archive doesn't have a signed Release file or no Release file at all "
+"current APT versions will raise a warning in <command>update</command> "
+"operations and frontends like <command>apt-get</command> will require "
+"explicit confirmation if an installation request includes a package from "
+"such an unauthenticated archive."
 msgstr ""
-"Se um pacote vem dum arquivo sem assinatura ou com uma assinatura para a "
-"qual o apt não tem a chave, esse pacote é considerado 'não sendo de "
-"confiança' e instalá-lo irá resultar num grande aviso. Actualmente o "
-"<command>apt-get</command> irá avisar apenas de arquivos não assinados, "
-"lançamentos futuros poderão vir a forçar que todas as fontes sejam "
-"verificadas antes de descarregar pacotes delas."
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
 msgid ""
-"The package frontends &apt-get;, &aptitude; and &synaptic; support this new "
-"authentication feature."
+"In the future APT will refuse to work with unauthenticated repositories by "
+"default until support for them is removed entirely. Users have the option to "
+"opt-in to this behavior already by setting the configuration option "
+"<option>Acquire::AllowInsecureRepositories</option> to <literal>false</"
+"literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "The package frontends &apt-get;, &aptitude; and &synaptic; support this "
+#| "new authentication feature."
+msgid ""
+"Note: All APT-based package management frontends like &apt-get;, &aptitude; "
+"and &synaptic; support this authentication feature, so this manpage uses "
+"<literal>APT</literal> to refer to them all for simplicity only."
 msgstr ""
 "Os frontends de pacotes &apt-get;, &aptitude; e &synaptic; suportam esta "
 "nova funcionalidade de autenticação."
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-secure.8.xml
-msgid "Trusted archives"
+#, fuzzy
+#| msgid "Trusted archives"
+msgid "Trusted repositories"
 msgstr "Arquivos de confiança"
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
-msgid ""
-"The chain of trust from an apt archive to the end user is made up of several "
+#, fuzzy
+#| msgid ""
+#| "The chain of trust from an apt archive to the end user is made up of "
+#| "several steps. <command>apt-secure</command> is the last step in this "
+#| "chain; trusting an archive does not mean that you trust its packages not "
+#| "to contain malicious code, but means that you trust the archive "
+#| "maintainer. It's the archive maintainer's responsibility to ensure that "
+#| "the archive's integrity is preserved."
+msgid ""
+"The chain of trust from an APT archive to the end user is made up of several "
 "steps. <command>apt-secure</command> is the last step in this chain; "
 "trusting an archive does not mean that you trust its packages not to contain "
 "malicious code, but means that you trust the archive maintainer. It's the "
@@ -2947,13 +3112,22 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
-msgid ""
-"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. In order to become "
-"effective, this upload needs to be signed by a key contained in the Debian "
-"Maintainers keyring (available in the debian-keyring package). Maintainers' "
-"keys are signed by other maintainers following pre-established procedures to "
-"ensure the identity of the key holder."
+#, fuzzy
+#| msgid ""
+#| "The chain of trust in Debian starts when a maintainer uploads a new "
+#| "package or a new version of a package to the Debian archive. In order to "
+#| "become effective, this upload needs to be signed by a key contained in "
+#| "the Debian Maintainers keyring (available in the debian-keyring package). "
+#| "Maintainers' keys are signed by other maintainers following pre-"
+#| "established procedures to ensure the identity of the key holder."
+msgid ""
+"The chain of trust in Debian e.g. starts when a maintainer uploads a new "
+"package or a new version of a package to the Debian archive. In order to "
+"become effective, this upload needs to be signed by a key contained in one "
+"of the Debian package maintainers keyrings (available in the debian-keyring "
+"package). Maintainers' keys are signed by other maintainers following pre-"
+"established procedures to ensure the identity of the key holder. Similar "
+"procedures exist in all Debian-based distributions."
 msgstr ""
 "A corrente de confiança em Debian começa quando o responsável faz o upload "
 "de um novo pacote ou de uma nova versão de um pacote para o arquivo Debian. "
@@ -3036,11 +3210,17 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "However, it does not defend against a compromise of the Debian master "
+#| "server itself (which signs the packages) or against a compromise of the "
+#| "key used to sign the Release files. In any case, this mechanism can "
+#| "complement a per-package signature."
 msgid ""
-"However, it does not defend against a compromise of the Debian master server "
-"itself (which signs the packages) or against a compromise of the key used to "
-"sign the Release files. In any case, this mechanism can complement a per-"
-"package signature."
+"However, it does not defend against a compromise of the master server itself "
+"(which signs the packages) or against a compromise of the key used to sign "
+"the Release files. In any case, this mechanism can complement a per-package "
+"signature."
 msgstr ""
 "No entanto, isto não defende contra um compromisso do próprio servidor "
 "mestre da Debian (o qual assina os pacotes) ou contra um compromisso da "
@@ -3054,11 +3234,17 @@ msgstr "Configuração do utilizador"
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "<command>apt-key</command> is the program that manages the list of keys "
+#| "used by apt. It can be used to add or remove keys, although an "
+#| "installation of this release will automatically contain the default "
+#| "Debian archive signing keys used in the Debian package repositories."
 msgid ""
 "<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys, although an installation of "
-"this release will automatically contain the default Debian archive signing "
-"keys used in the Debian package repositories."
+"by APT to trust repositories. It can be used to add or remove keys as well "
+"as list the trusted keys. Limiting which key(s) are able to sign which "
+"archive is possible via the <option>Signed-By</option> in &sources-list;."
 msgstr ""
 "<command>apt-key</command> é o programa que gere a lista de chaves usada "
 "pelo apt. Pode ser usado para adicionar ou remover chaves apesar de uma "
@@ -3069,6 +3255,15 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
 msgid ""
+"Note that a default installation already contains all keys to securily "
+"acquire packages from the default repositories, so fiddling with "
+"<command>apt-key</command> is only needed if third-party repositories are "
+"added."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
 "In order to add a new key you need to first download it (you should make "
 "sure you are using a trusted communication channel when retrieving it), add "
 "it with <command>apt-key</command> and then run <command>apt-get update</"
@@ -3121,15 +3316,33 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
 #: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "<emphasis>Publish the key fingerprint</emphasis>, that way your users "
+#| "will know what key they need to import in order to authenticate the files "
+#| "in the archive."
 msgid ""
 "<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
 "know what key they need to import in order to authenticate the files in the "
-"archive."
+"archive. It is best to ship your key in its own keyring package like "
+"&keyring-distro; does with &keyring-package; to be able to distribute "
+"updates and key transitions automatically later."
 msgstr ""
 "<emphasis>Publicar a impressão digital da chave</emphasis>, deste modo os "
 "seus utilizadores irão saber que chave precisam de importar de modo a "
 "autenticar os ficheiros no arquivo."
 
+#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
+#: apt-secure.8.xml
+msgid ""
+"<emphasis>Provide instructions on how to add your archive and key</"
+"emphasis>.  If your users can't acquire your key securily the chain of trust "
+"described above is broken.  How you can help users add your key depends on "
+"your archive and target audience ranging from having your keyring package "
+"included in another archive users already have configured (like the default "
+"repositories of their distribution) to leverage the web of trust."
+msgstr ""
+
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
 msgid ""
@@ -3152,9 +3365,17 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "For more background information you might want to review the <ulink url="
+#| "\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+#| "Security Infrastructure</ulink> chapter of the Securing Debian Manual "
+#| "(available also in the harden-doc package) and the <ulink url=\"http://"
+#| "www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution "
+#| "HOWTO</ulink> by V. Alex Brennen."
 msgid ""
 "For more background information you might want to review the <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+"\"https://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
 "Security Infrastructure</ulink> chapter of the Securing Debian Manual "
 "(available also in the harden-doc package) and the <ulink url=\"http://www."
 "cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution HOWTO</"
@@ -3541,6 +3762,13 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
 #: apt.conf.5.xml
 msgid ""
+"all options set in the binary specific configuration subtree are moved into "
+"the root of the tree."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
+#: apt.conf.5.xml
+msgid ""
 "the command line options are applied to override the configuration "
 "directives or to load even more configuration files."
 msgstr ""
@@ -4800,6 +5028,41 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt.conf.5.xml
+#, fuzzy
+#| msgid "User configuration"
+msgid "Binary specific configuration"
+msgstr "Configuração do utilizador"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Especially with the introduction of the <command>apt</command> binary it can "
+"be useful to set certain options only for a specific binary as even options "
+"which look like they would effect only a certain binary like <option>APT::"
+"Get::Show-Versions</option> effect <command>apt-get</command> as well as "
+"<command>apt</command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Setting an option for a specific binary only can be achieved by setting the "
+"option inside the <option>Binary::<replaceable>specific-binary</"
+"replaceable></option> scope. Setting the option <option>APT::Get::Show-"
+"Versions</option> for the <command>apt</command> only can e.g. by done by "
+"setting <option>Binary::apt::APT::Get::Show-Versions</option> instead."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Note that as seen in the DESCRIPTION section further above you can't set "
+"binary-specific options on the commandline itself nor in configuration files "
+"loaded via the commandline."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.conf.5.xml
 msgid "Directories"
 msgstr "Directórios"
 
@@ -5700,8 +5963,7 @@ msgstr ""
 "literal> ou <literal>APT::Update::{Pre,Post}-Invoke</literal>."
 
 #. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml
-#: apt-ftparchive.1.xml
+#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml apt-ftparchive.1.xml
 msgid "Examples"
 msgstr "Exemplos"
 
@@ -7585,6 +7847,22 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml
 msgid ""
+"<option>Trusted</option> (<option>trusted</option>)  is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g.  packages are installed from this "
+"source. This option can be used to override this decision either with the "
+"value <literal>yes</literal>, which lets APT consider this source always as "
+"a trusted source even if it has no or fails authentication checks by "
+"disabling parts of &apt-secure; and should therefore only be used in a local "
+"and trusted context (if at all) as otherwise security is breached. The "
+"opposite can be achieved with the value no, which causes the source to be "
+"handled as untrusted even if the authentication checks passed successfully.  "
+"The default value can't be set explicitly."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
 "<option>Signed-By</option> (<option>signed-by</option>)  is either an "
 "absolute path to a keyring file (has to be accessible and readable for the "
 "<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
@@ -10729,6 +11007,125 @@ msgid "Which will use the already fetched archives on the disc."
 msgstr "O qual irá usar os arquivos já obtidos e que estão no disco."
 
 #~ msgid ""
+#~ "<command>apt</command> (Advanced Package Tool) is the command-line tool "
+#~ "for handling packages. It provides a commandline interface for the "
+#~ "package management of the system.  See also &apt-get; and &apt-cache; for "
+#~ "more low-level command options."
+#~ msgstr ""
+#~ "<command>apt</command> (Advanced Package Tool) é uma ferramenta de linha "
+#~ "de comandos para manuseamento de pacotes. Disponibiliza uma interface de "
+#~ "linha de comandos para a gestão de pacotes do sistema. Veja também &apt-"
+#~ "get; e &apt-cache; para mais opções de baixo nível dos comandos."
+
+#~ msgid ""
+#~ "<literal>search</literal> searches for the given term(s) and display "
+#~ "matching packages."
+#~ msgstr ""
+#~ "<literal>search</literal> procura por termo(s) determinado(s) e mostra os "
+#~ "pacotes correspondentes."
+
+#~ msgid ""
+#~ "<literal>show</literal> shows the package information for the given "
+#~ "package(s)."
+#~ msgstr ""
+#~ "<literal>show</literal> mostra a informação do pacote para o(s) pacote(s) "
+#~ "determinado(s)."
+
+#~ msgid ""
+#~ "<literal>install</literal> is followed by one or more package names "
+#~ "desired for installation or upgrading."
+#~ msgstr ""
+#~ "<literal>install</literal> é seguido por um ou mais nomes de pacotes que "
+#~ "se deseja instalar ou actualizar."
+
+#~ msgid ""
+#~ "<literal>update</literal> is used to resynchronize the package index "
+#~ "files from their sources."
+#~ msgstr ""
+#~ "<literal>update</literal> é usado para re-sincronizar o índice dos "
+#~ "pacotes a partir das suas fontes."
+
+#~ msgid "Script usage"
+#~ msgstr "Utilização de script"
+
+#~ msgid "Differences to &apt-get;"
+#~ msgstr "Diferenças para o &apt-get;"
+
+#~ msgid ""
+#~ "The <command>apt</command> command is meant to be pleasant for end users "
+#~ "and does not need to be backward compatible like &apt-get;. Therefore "
+#~ "some options are different:"
+#~ msgstr ""
+#~ "O comando  <command>apt</command> destina-se a ser agradável para os "
+#~ "utilizadores finais e não precisa de ser compatível com as versões "
+#~ "anteriores como o &apt-get;. Por isso algumas opções são diferentes."
+
+#~ msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
+#~ msgstr "A opção <literal>DPkg::Progress-Fancy</literal> está activada."
+
+#~ msgid "The option <literal>APT::Color</literal> is enabled."
+#~ msgstr "A opção <literal>APT::Color</literal> está activada."
+
+#~ msgid ""
+#~ "A new <literal>list</literal> command is available similar to "
+#~ "<literal>dpkg --list</literal>."
+#~ msgstr ""
+#~ "Está disponível um novo comando <literal>list</literal> de modo "
+#~ "semelhante a <literal>dpkg --list</literal>."
+
+#~ msgid ""
+#~ "The option <literal>upgrade</literal> has <literal>--with-new-pkgs</"
+#~ "literal> enabled by default."
+#~ msgstr ""
+#~ "A opção <literal>upgrade</literal> tem <literal>--with-new-pkgs</literal> "
+#~ "activado por predefinição."
+
+#~ msgid ""
+#~ "Pass advanced options to gpg. With adv --recv-key you can download the "
+#~ "public key."
+#~ msgstr ""
+#~ "Passa opções avançadas ao gpg. Com adv --recv-key você pode descarregar a "
+#~ "chave pública."
+
+#~ msgid "mark/unmark a package as being automatically-installed"
+#~ msgstr "marca/desmarca um pacote como sendo instalado automaticamente"
+
+#~ msgid ""
+#~ "<command>apt-mark</command> will change whether a package has been marked "
+#~ "as being automatically installed."
+#~ msgstr ""
+#~ "<command>apt-mark</command> irá modificar se um pacote foi marcado como "
+#~ "sendo instalado automaticamente."
+
+#~ msgid ""
+#~ "<literal>hold</literal> is used to mark a package as held back, which "
+#~ "will prevent the package from being automatically installed, upgraded or "
+#~ "removed.  The command is only a wrapper around <command>dpkg --set-"
+#~ "selections</command> and the state is therefore maintained by &dpkg; and "
+#~ "not affected by the <option>--file</option> option."
+#~ msgstr ""
+#~ "<literal>hold</literal> é usado para marcar um pacote como retido, o que "
+#~ "vai prevenir que o pacote seja automaticamente instalado, actualizado ou "
+#~ "removido. O comando é apenas um invólucro em redor de <command>dpkg --set-"
+#~ "selections</command> e o estado é assim mantido pelo &dpkg; e não é "
+#~ "afectado pela opção <option>--file</option>."
+
+#~ msgid ""
+#~ "If a package comes from a archive without a signature, or with a "
+#~ "signature that apt does not have a key for, that package is considered "
+#~ "untrusted, and installing it will result in a big warning. <command>apt-"
+#~ "get</command> will currently only warn for unsigned archives; future "
+#~ "releases might force all sources to be verified before downloading "
+#~ "packages from them."
+#~ msgstr ""
+#~ "Se um pacote vem dum arquivo sem assinatura ou com uma assinatura para a "
+#~ "qual o apt não tem a chave, esse pacote é considerado 'não sendo de "
+#~ "confiança' e instalá-lo irá resultar num grande aviso. Actualmente o "
+#~ "<command>apt-get</command> irá avisar apenas de arquivos não assinados, "
+#~ "lançamentos futuros poderão vir a forçar que todas as fontes sejam "
+#~ "verificadas antes de descarregar pacotes delas."
+
+#~ msgid ""
 #~ "No action; perform a simulation of events that would occur but do not "
 #~ "actually change the system.  Configuration Item: <literal>APT::Get::"
 #~ "Simulate</literal>."